英语
俄语
The flexible waterproof casing should be installed on a firm foundation. The flexible waterproof casing only needs to fix the thrust plate, the anchor bolts are reserved for a height of 50-80mm, and the foundation should be flat. Install and fix the flexible waterproof casing in the designated position, check the number of flexible waterproof casing, lay the water stop wing ring on the gland as required, and lubricate each moving part, and the installation is ready.
In addition, connect the pipeline with the flange of the pressure flexible waterproof casing in and out of the pipeline, install the sealing filling material on the wall, and add the pouring material to play the role of waterproof and anti-corrosion, and observe at any time.
When working, there is a pressing device (cylinder piston rod or screw) to push the pressure fence, and press the gland and the water stop wing ring between the pressure fence and the thrust plate. The filter chamber is formed in the middle, and the material pressed by the material pump enters each filter chamber from the thrust plate feed hole. The solid particles are trapped in the filter chamber and form a sealed castable. The water passes through the sealed castable and water stop.
The wing ring is discharged from the body through the liquid outlet. If you need to wash the sealed castable, you can use the washing liquid port on the tail plate to wash the sealed castable with washing water. If it is necessary to blow dry the sealed castable, compressed air can be introduced into the washing liquid port to blow dry the sealed castable.
