For accessories such as transition joints that need to be installed before they can be used, an optimized installation effect will be required before the optimized application effect will be presented. From the perspective of the installation work of the joint, it should not be done right away. Install immediately, but need to be inspected and cleaned before starting the installation.
Among them, everyone is required to check before installing the transition joint, mainly considering that there may be undesirable conditions such as the manufacturer’s delivery of the wrong goods, and the damage of the joint during transportation. In order to affect the smooth progress of the installation operation because of these problems, and cause losses to themselves, It is recommended that you do a comprehensive inspection of the joints before installation to confirm that there is no abnormal condition in the joints, and the inspection should also include the system. While confirming that the joints are not bad, they must also confirm that the system is not bad, especially affecting the installation operation. Bad condition.
As for requiring everyone to clean the transition joint before starting to install it, it is considered that the system has relatively high requirements for the cleanliness of the pipeline interior. If there are debris mixed in, it will have a great adverse effect on the performance of the system. Therefore, it is necessary to clean the pipelines and joints before installing them to ensure that the interior is completely clean and to avoid contamination of the internal media.
Therefore, in order to optimize the installation operation of the transition joint, promote the optimization of the assembly effect, and maintain the good condition of the entire system, I remind everyone to check and clean before installing the joint.

/product/reducing-camlock-coupling/